Product Description

Product Description

1 . One year warranty
2 . Competitive price than other manufactures
3 . Portable to carry with
4 . Fast inflation and low noise
5 . Can be pumped more than 20 , 000 times
6 . Anti-dust
7 . Water resistant : IP 67
8 .1/4”G,1/4”NPT,3/8”G,3/8”NPT is available.

Product specifications

Air Ride Suspensions Aircompressors Air Compressor in Stock

VIAIR 20008 High-Flow Air Source Kit 

High-Flow 200 CZPT Air Source Kits come with a powerful, low amp-draw 480C VIAIR compressor mounted on a 200 PSI-rated 2.0 gallon air tank with 5 ports. All 200 CZPT Air Source kits come with a pre-wired 165/200 CZPT pressure switch. Both kits not only come with the industry’s leading 200 CZPT compressors but also come with a drain cock, safety valve, 1/2-inch port compression fitting for 3/8-inch air line pre-installed!!!!
To use, simply connect the pressure switch to fused power, make a CZPT ground and connect an air line to the compression fitting. The use of a 40-amp relay and an appropriately-rated fuse is strongly recommended to preserve the life of the pressure switch.
Features:
–  Gearless, direct-drive electric motors
– Oil-less design requires no maintenance (beside filter inspection/replacement)
– High performance, heavy duty PTFE piston ring
– Anodized piston cylinder for increased wear protection
– Precision, high speed, durable bearings for increased piston & motor life
– Sealed motor housing for moisture resistance
– Environmental seals where electrical connections enter motor housing
– Efficient, oversized heat sink head assembly for increased heat dissipation, duty cycle & performance
– High performance check valve eliminates restart pressure on head and piston
– Replacement air filter elements (filtration to 10 microns)
– Heavy duty mounting feet
– Reinforced vibration isolators for safe & quiet operation
– Mounting hardware (bolts, washers, locking washers, nuts)
– Thermal overload protection that protect compressor in event of overheating/over duty cycle operation 
– Maximum operating temperature is 158 F
– Minimum operating temperature is -40 F. 
– Wires terminated with ring ground terminal & spade positive lead terminal
– VIAIR 12 Month Manufacturer Warranty

Product Name 480C Air Tyre Compressor
Voltage DC 12V
Max Amperage 23A
Max Pressure 300PSI(2.06Mpa)
Max Working Pressure 200PSI(1.37Mpa)
Max Duty Cycle 100%@100PSI
Flow Rate 1.8CFM@0PSI
Metal Hose Ø14mm*0.5m
Check Valve Threads 1/4″.3/8”
Fill Rate(8L Tank) 0-120PSI   1Min. 40Sec
80-120PSI 40Sec
Main Dimension(LxWxH) 325*145*225mm
Net Weight(Kgs)

10.5kgs

Detailed Photos

1,2W  air suspenison manifold
2,VUX2F maifold  
3,Accuair VU4F valve block with CZPT switchbox
4,AA-ROT-120 height sensor with Wiring harness cable
5,Pressure Switch for air compressor
6,Water-proof VUX4F valve block with Switch  Controller
7,Air Tank 
8,Pressure Sensor Transducer
 9,444C/480C Air Compressor

Packaging & Shipping

Packaging type: 

VPC Box White Box Color Box VPC Carton Pallet

Delivery time:

conventional products customized products specially customized products
on the day of payment 10 workdays  25 workdays.

Payment term:

Paypal TT Western Union DP LC Money Gram Online Bank Alibaba credit order Pay later DA
YES YES YES NO NO YES YES YES YES

         YES            

Transportation:

Express(DHL,UPS,TNT,JCEX,FEDEX) is available.

Sea and Air transports are available.

The most suilable transport way will be chosen for you.

 

 

Classification: Variable Capacity
Job Classification: Reciprocating
Transmission Power: Power
Cooling Method: Air-cooled
Cylinder Arrangement Mode: Duplex
Cylinder Stage: Multi Stages
Samples:
US$ 65/Piece
1 Piece(Min.Order)

|
Request Sample

Customization:
Available

|

How to Choose the Right Air Compressor

An air compressor uses pressurized air to power a variety of tools. They are most commonly used to power nailers and impact wrenches. Other popular uses for air compressors include paint sprayers and impact wrenches. While all air compressors have the same basic construction, their specialty differs. Ultimately, their differences come down to the amount of air they can push. Read on for information on each type of air compressor. These tools are great for many different purposes, and choosing the right air compressor depends on your specific needs.
air-compressor

Electric motor

While purchasing an electric motor for air compressor, compatibility is a key factor. Not all motors work with the same type of air compressor, so it’s important to check the manufacturer’s instructions before purchasing. By doing this, you can avoid wasting money on an incompatible motor. Another important consideration is speed. A motor’s speed is its rate of rotation, measured in revolutions per minute. It is critical that you purchase a motor with sufficient speed to meet the needs of your air compressor.
Typically, an electric motor for air compressor is 1.5 hp. It is ideal for use with medical equipment and metal-cutting machines. It also performs well under continuous operation and offers a high efficiency and energy-saving performance. Moreover, it features an attractive price, making it a good choice for a wide range of applications. If you are looking for a motor for an air compressor, look no further than a ZYS series.
A motor’s protection class indicates how the motor will operate. Protection classes are specified by the IEC 60034-5. These are stated with two digits and represent the protection against solid objects and water. For example, an IP23 rating means that the motor will be protected from solid objects, while IP54 means that it will protect from dust and water sprayed from all directions. It is vital to choose a motor with the correct protection class for your air compressor.
When choosing an electric motor, you should consider whether it’s compatible with the brand of air compressor. Some may be compatible, while others may require advanced electronics skills to repair. However, most air compressors are covered by warranty, so it’s important to check with the manufacturer if the warranty is still in effect before you spend a dime on a replacement. The motor should be replaced if it has failed to perform as designed.
air-compressor

Oil bath

Air compressors require proper lubrication to function efficiently. The piston must draw air with minimal friction. Depending on their design, air compressors can either be oil-lubricated or oil-free. The former uses oil to reduce piston friction, while the latter splashes it on the cylinder bearings and walls. Such air compressors are commonly known as oil-flooded air compressors. In order to keep their oil baths clean, they are recommended for use in locations with high dust levels.

Start/stop control

An air compressor can be controlled by a start/stop control. This type of control sends a signal to the main motor that activates the compressor when the demand for air falls below a preset limit. This control strategy is effective for smaller air compressors and can be useful for reducing energy costs. Start/stop control is most effective in applications where air pressure does not change frequently and where the compressor is not required to run continuously.
To troubleshoot this problem, you need to check the power supply of your compressor. To check the supply side, use a voltage monitor to determine if power is flowing to the compressor. Ensure that the power supply to the compressor is steady and stable at all times. If it fluctuates, the compressor may not start or stop as expected. If you cannot find the problem with the air compressor power supply, it may be time to replace it.
In addition to the start/stop control, you may want to purchase additional air receivers for your air compressor. These can increase the capacity of air stored and reduce the number of times it starts and stops. Another way to decrease the number of starts per hour is to add more air receivers. Then, you can adjust the control to match your requirements. You can also install a pressure gauge that monitors the compressor’s performance.
Start/stop control for air compressors can be complex, but the basic components are relatively easy to understand. One way to test them is to turn the compressor on or off. It is usually located on the exterior of the motor. If you’re unsure of the location of these components, check the capacitors and make sure that the air compressor is not running while you’re not using it. If it does, try to remove the capacitor.
Variable displacement control is another way to adjust the amount of air flowing into the compressor. By controlling the amount of air, the control can delay the use of additional compressors until more required air is available. In addition to this, the device can also monitor the energy used in the compressor. This control method can result in substantial energy savings. You can even save on the amount of electricity by using variable displacement control. It is essential for efficient compressed air systems.
air-compressor

Variable speed drive

A VFD, or variable frequency drive, is a type of electric motor that adjusts its speed to match the demand for air. It is an efficient way to reduce energy costs and improve system reliability. In fact, studies have shown that a 20% reduction in motor speed can save up to 50% of energy. In addition, a VFD can monitor additional variables such as compressor oil pressure and motor temperature. By eliminating manual checks, a VFD will improve the performance of the application and reduce operating costs.
In addition to reducing energy costs, variable-speed drives also increase productivity. A variable-speed air compressor reduces the risk of system leaks by 30 percent. It also reduces the risk of system leaks by reducing pressure in the system. Because of these advantages, many governments are promoting this technology in their industries. Many even offer incentives to help companies upgrade to variable-speed drives. Therefore, the variable-speed drive can benefit many air compressor installations.
One major benefit of a variable-speed drive is its ability to optimize energy use. Variable frequency drives are able to ramp up and down to match the demand for air. The goal is to optimize the pressure and flow in the system so that the best “dead band” occurs between forty percent and eighty percent of full load. A variable-speed compressor will also increase energy efficiency because of its programmability.
A variable-speed air compressor can also be used to control the amount of air that is compressed by the system. This feature adjusts the frequency of power supplied to the motor based on the demand. If the demand for air is low, the frequency of the motor will reduce to save energy. On the other hand, if there is an excess demand for air, the variable-speed compressor will increase its speed. In addition, this type of air compressor is more efficient than its fixed-speed counterpart.
A VFD has many benefits for compressed air systems. First, it helps stabilize the pressure in the pipe network, thereby reducing the power losses due to upstream pressure. It also helps reduce the power consumption caused by fluctuations in upward pressure. Its benefits are also far-reaching. And as long as the air pressure and air supply is properly sized, a VFD will help optimize the efficiency of compressed air systems.

China Professional Air Ride Suspensions Aircompressors Air Compressor in Stock   with high qualityChina Professional Air Ride Suspensions Aircompressors Air Compressor in Stock   with high quality
editor by CX

2023-04-14