Item Description

HangZhou CZPT Maritime Tools Co., Ltd. covers an location of 24600 square meters, located in jiangyan Economic Development Zone, fumin CZPT Park, with extensive take a look at bench and large lifting products check bench, is specialised in the creation of Maritime protection existence-saving equipment enterprises.

The organization has the top technology, strict management, fine gear, strictly by the China Classification Modern society CCSISO9001:2008 quality administration system certification to guarantee, the principal production: Maritime lifeboat/life raft landing gear, gravity inverted boom davit, free of charge landing davit, gangway winch, lifeboat/rescue boat winch, Marine reduced, medium and substantial stress air compressor and all varieties of fully enclosed/open up lifeboat and rescue boat.

HangZhou CZPT Maritime Equipment Co., Ltd. is the manufacturing of maritime rescue equipment specialist business, major items are the life boat winch, the rescue boat winch, cost-free drop kind lifeboat launching device, gravity pour davit arm sort, single arm liferaft reduced unit, one arm boat/raft hanger and cranes, electric powered, pneumatic) ladder winch and Maritime air compressor and different kinds of kind a complete established of lifeboat.

Company lifestyle: To create the entire world hefty market carrier

— Corporate philosophy

Company tenet: synchronizing with the entire world and customers

Organization eyesight: rigid management, sustainable advancement and satisfactory service

Business values: The pursuit of top quality The pursuit of Haihao

Company spirit: Honesty, diligence and earnest

Haihao ships are interwoven with glory and desire, hardships and challenges, and will proceed to burst out brilliant brilliance in continuous improvement and battle

Haihao Marine respects each and every employee’s challenging work, generates a amount actively playing field for staff, and provides entire engage in to their possible



Q: What are the accessible delivery techniques?

A: Port spot: HangZhou or ZheJiang , China Delivery to: CZPT Shipping technique: by sea, by air, by categorical Estimated shipping and delivery dates depend on certain order checklist, delivery services selected and receipt of cleared payment. Delivery time could vary.


Q: What payment methods are supported?

A: Payment: By T/T, Western Union, Funds Gram for samples one hundred% with the buy, for creation,thirty% paid out for deposit by just before manufacturing arrangement, the balance to be compensated just before shipment. Negotiation is acknowledged.


Q: How to management the high quality of CZPT Goods?

A: Items Materials: Strictly handle the substance employed, make positive they can fulfill global requested specifications, and preserve extended doing work existence.
Semi-finished goods inspection: We look at the proudcts100% just before completed. This kind of as Visible Inspection, Thread tests, Leak Testing, and so on.
Generation line test: Our engineers will examine devices and traces at mounted time period.
Concluded Item Inspection: We do the take a look at according to ISO19879-2005, leakage check, proof test, re-use of factors, burst check, cyclic endurance check, vibration take a look at, etc.
QCTeam:A QC crew with more than 10 skilled and specialized personnel. To make certain one hundred% goods examining.


Q: How prolonged is the solution day of shipping and delivery probably?

A: The various solution, as nicely as the diferent operate amount can influence the date of shipping, but in ordinary situation merchandise date of delivery about 30 times. Most of items have stock, make contact with us anytime to get more details.


Q: How to Custom-manufactured(OEM/ODM)?

A: If you have a new solution drawing or a sample, make sure you deliver to us, and we can customized-produced the item as your required. We wllalso offer our expert advices of the products to make the design to be more recognized & increase the overall performance.


Q: How about the mini order quantity?

A: We do not have strict requirments on most things, thanks to we have inventory. Much more info can ship us the enquiry checklist, we verify and reply you. For custom made-created, MoQ will be adviced due to the particular solution.

After-sales Service: After-Sales
Warranty: After-Sales
Lubrication Style: Oil-less
Cooling System: Air Cooling
Power Source: AC Power
Cylinder Position: Angular
US$ 5000/Piece
1 Piece(Min.Order)

Request Sample



How to Choose the Right Air Compressor

An air compressor uses pressurized air to power a variety of tools. They are most commonly used to power nailers and impact wrenches. Other popular uses for air compressors include paint sprayers and impact wrenches. While all air compressors have the same basic construction, their specialty differs. Ultimately, their differences come down to the amount of air they can push. Read on for information on each type of air compressor. These tools are great for many different purposes, and choosing the right air compressor depends on your specific needs.

Electric motor

While purchasing an electric motor for air compressor, compatibility is a key factor. Not all motors work with the same type of air compressor, so it’s important to check the manufacturer’s instructions before purchasing. By doing this, you can avoid wasting money on an incompatible motor. Another important consideration is speed. A motor’s speed is its rate of rotation, measured in revolutions per minute. It is critical that you purchase a motor with sufficient speed to meet the needs of your air compressor.
Typically, an electric motor for air compressor is 1.5 hp. It is ideal for use with medical equipment and metal-cutting machines. It also performs well under continuous operation and offers a high efficiency and energy-saving performance. Moreover, it features an attractive price, making it a good choice for a wide range of applications. If you are looking for a motor for an air compressor, look no further than a ZYS series.
A motor’s protection class indicates how the motor will operate. Protection classes are specified by the IEC 60034-5. These are stated with two digits and represent the protection against solid objects and water. For example, an IP23 rating means that the motor will be protected from solid objects, while IP54 means that it will protect from dust and water sprayed from all directions. It is vital to choose a motor with the correct protection class for your air compressor.
When choosing an electric motor, you should consider whether it’s compatible with the brand of air compressor. Some may be compatible, while others may require advanced electronics skills to repair. However, most air compressors are covered by warranty, so it’s important to check with the manufacturer if the warranty is still in effect before you spend a dime on a replacement. The motor should be replaced if it has failed to perform as designed.

Oil bath

Air compressors require proper lubrication to function efficiently. The piston must draw air with minimal friction. Depending on their design, air compressors can either be oil-lubricated or oil-free. The former uses oil to reduce piston friction, while the latter splashes it on the cylinder bearings and walls. Such air compressors are commonly known as oil-flooded air compressors. In order to keep their oil baths clean, they are recommended for use in locations with high dust levels.

Start/stop control

An air compressor can be controlled by a start/stop control. This type of control sends a signal to the main motor that activates the compressor when the demand for air falls below a preset limit. This control strategy is effective for smaller air compressors and can be useful for reducing energy costs. Start/stop control is most effective in applications where air pressure does not change frequently and where the compressor is not required to run continuously.
To troubleshoot this problem, you need to check the power supply of your compressor. To check the supply side, use a voltage monitor to determine if power is flowing to the compressor. Ensure that the power supply to the compressor is steady and stable at all times. If it fluctuates, the compressor may not start or stop as expected. If you cannot find the problem with the air compressor power supply, it may be time to replace it.
In addition to the start/stop control, you may want to purchase additional air receivers for your air compressor. These can increase the capacity of air stored and reduce the number of times it starts and stops. Another way to decrease the number of starts per hour is to add more air receivers. Then, you can adjust the control to match your requirements. You can also install a pressure gauge that monitors the compressor’s performance.
Start/stop control for air compressors can be complex, but the basic components are relatively easy to understand. One way to test them is to turn the compressor on or off. It is usually located on the exterior of the motor. If you’re unsure of the location of these components, check the capacitors and make sure that the air compressor is not running while you’re not using it. If it does, try to remove the capacitor.
Variable displacement control is another way to adjust the amount of air flowing into the compressor. By controlling the amount of air, the control can delay the use of additional compressors until more required air is available. In addition to this, the device can also monitor the energy used in the compressor. This control method can result in substantial energy savings. You can even save on the amount of electricity by using variable displacement control. It is essential for efficient compressed air systems.

Variable speed drive

A VFD, or variable frequency drive, is a type of electric motor that adjusts its speed to match the demand for air. It is an efficient way to reduce energy costs and improve system reliability. In fact, studies have shown that a 20% reduction in motor speed can save up to 50% of energy. In addition, a VFD can monitor additional variables such as compressor oil pressure and motor temperature. By eliminating manual checks, a VFD will improve the performance of the application and reduce operating costs.
In addition to reducing energy costs, variable-speed drives also increase productivity. A variable-speed air compressor reduces the risk of system leaks by 30 percent. It also reduces the risk of system leaks by reducing pressure in the system. Because of these advantages, many governments are promoting this technology in their industries. Many even offer incentives to help companies upgrade to variable-speed drives. Therefore, the variable-speed drive can benefit many air compressor installations.
One major benefit of a variable-speed drive is its ability to optimize energy use. Variable frequency drives are able to ramp up and down to match the demand for air. The goal is to optimize the pressure and flow in the system so that the best “dead band” occurs between forty percent and eighty percent of full load. A variable-speed compressor will also increase energy efficiency because of its programmability.
A variable-speed air compressor can also be used to control the amount of air that is compressed by the system. This feature adjusts the frequency of power supplied to the motor based on the demand. If the demand for air is low, the frequency of the motor will reduce to save energy. On the other hand, if there is an excess demand for air, the variable-speed compressor will increase its speed. In addition, this type of air compressor is more efficient than its fixed-speed counterpart.
A VFD has many benefits for compressed air systems. First, it helps stabilize the pressure in the pipe network, thereby reducing the power losses due to upstream pressure. It also helps reduce the power consumption caused by fluctuations in upward pressure. Its benefits are also far-reaching. And as long as the air pressure and air supply is properly sized, a VFD will help optimize the efficiency of compressed air systems.

China Intelligent Display Motor Efficiency Long Working Hours Direct Drive Screw Air Compressor     with Good qualityChina Intelligent Display Motor Efficiency Long Working Hours Direct Drive Screw Air Compressor     with Good quality
editor by CX 2023-04-10