Product Description

GREAT!!!Variable Speed Driven Screw Air Compressor with Pm Motor

 

1.Photo for GREAT!!!Variable Speed Driven Screw Air Compressor with Pm Motor

2. Energy saving advantages of GREAT!!!Variable Speed Driven Screw Air Compressor with Pm Motor

1). Adopt One-piece shaft of the permanent magnetic motor and the air end
★Permanent magnetic Motor’ rotor is directly sleeved on shaft of the air end, embedded integrated direct-connecting structure, without coupling part or transmission gear, namely one-piece shaft, ensure 100% transmission efficiency.
★Taper connection is adopted for motor, and it can be assembled and disassembled very simply.
2). Adopt permanent magnetic frequency conversion electric motor
★Permanent magnetic frequency conversion motor is the most advanced technical electric motor, efficiency can be up to 97%, higher by 3%-5% than ordinary motor with frequency conversion device type, saving energy a lot obviously.
★Permanent magnetic electric motor adopt high temperature resistance rare earth permanent magnet to ensure no demagnetization. Without motor bearing or sleeve, so no need lubricating grease, no need concern alignment problem, compact structure, saving space, convenient use and maintenance.
3). Wide frequency conversion, constant pressure air feeding
★Frequency application scope (0HZ-200HZ) is wide, and motor efficiency under different load is basically constant.
★The motor is big torque, strong adaptability and loaded startup.
★The whole machine work in frequency conversion state, and can operate frequency modulation according to the client’s actual requirement of air consumption at constant pressure, realizing high efficiency and energy saving.
4). Running stable and reliable
★Machine starting on frequency conversion state, greatly reducing the impact to the power grid equipment, avoiding of damage to the electric equipment, and saving electric energy when starting.
★No need to set working pressure up and bottom limit value, can operate by regulating the frequency at the setting pressure point to stabilize the pressure, so can save electric energy by 10%-15%.
5). Energy saving a lot obviously
 Compared with the fixed speed type compressor, our permanent magnetic frequency conversion compressor can save energy by 30%; compared with the ordinary motor and frequency device  type compressor, our compressor can save energy by 5%-10%.

3. Advantages of the GREAT screw air compressor unit:
1). Approved by ISO9001certificate, SGS, CE and etc..
2). Adopt world famous brand of twin-screw air end, high efficiency, reliable and long use life.
3). Adopt world famous brand of air intake filter, oil filter, air and oil separator, realize high filtration accuracy, compressed air oil content under 3ppm, reach to international advanced standard level.
4). Equip with the most advanced air control system. Adopt air intake valve, intelligent control system and pressure sensor combined control method, can operate by ON and OFF 2 point, stepless air capacity control system, time-delay stop and automatically start device 3 air capacity control method, can meet different clients demand.
5). Intelligent microcomputer control system, Chinese and English language operation interface, malfunction display, alarm and machine stop automatically.
6). Adopt high quality and world famous brand of main components, like UK APD oil filter, America AMOT temperature controlling valve, SCHNEIDER electric parts and etc., high efficiency, reliable and long use life.

4. Technical parameter of GREAT!!!Variable Speed Driven Screw Air Compressor with Pm Motor

Model Exhause pressure (Mpa) Air displacemen (m3/min) Power (Kw) Noise (dBa) Dimensions (mm) Outlet pipe size Weight (Kg)
TKLYC-7F 0.7/0.8/1.0 1.23/1.16/1.02 7.5 65±3 840*670*925 G3/4 350
TKLYC-11F 0.7/0.8/1.0 1.65/1.62/1.4 7.5 65±3 1000*820*1145 G3/4 390
TKLYC-15F 0.7/0.8/1.0 2.65/2.24/2.1 15 65±3 1300*850*1257 G1 410
TKLYC-18F 0.7/0.8/1.0 3.1/3.0/2.7 18.5 65±3 1300*850*1257 G1 440
TKLYC-22F 0.7/0.8/1.0 3.8/3.7/3.3 22 65±3 1300*850*1258 G1 650
TKLYC-30F 0.7/0.8/1.0 5.3/5.1/4.5 30 68±3 1600*1100*1430 G1 1/2 800
TKLYC-37F 0.7/0.8/1.0 6.7/6.5/5.7 37 68±3 1600*1100*1430 G1 1/2 850
TKLYC-45F 0.7/0.8/1.0 8.6/8.0/7.1 45 68±3 1600*1100*1430 G1 1/2 900
TKLYC-55F 0.7/0.8/1.0 10.3/10.1/9.3 55 72±3 1750*1150*1500 DN50 1650
TKLYC-75F 0.7/0.8/1.0 14.0/13.5/12.5 75 72±3 1750*1150*1500 DN50 1800
TKLYC-90F 0.7/0.8/1.0 17.2/15.9/14.0 90 72±3 2000*1150*1680 DN50 1950
TKLYC-110F 0.7/0.8/1.0 21.4/19.9/18.1 110 73±3 2300*1540*1900 DN80 2500
TKLYC-132F 0.7/0.8/1.0 24.6/23.8/22.1 132 73±3 2300*1540*1900 DN80 2600
TKLYC-160F 0.7/0.8/1.0 28.7/27.1/25.2 160 75±3 2900*1540*2120 DN80 3600
TKLYC-185F 0.7/0.8/1.0 33.5/30.5/27.0 185 76±3 3100*1940*2389 DN80 4200
TKLYC-200F 0.7/0.8/1.0 36.5/33.5/30.6 200 78±3 3100*1940*2389 DN100 4400
TKLYC-250F 0.7/0.8/1.0 45.3/43.0/38.1 250 78±3 3400*2050*2330 DN100 4900

 

5. Our factory and workshop for  GREAT!!!Variable Speed Driven Screw Air Compressor with Pm Motor:
 

 

6. After sales service for GREAT!!!Variable Speed Driven Screw Air Compressor with Pm Motor:
1). Providing professional air compression program designing for free.
2). Providing our factory original machine parts at lowest price after machine sales.
3). Providing training and guidance for free, customers can send their staff to our factory to learn how to operate the machines.
4). Warranty period: the screw main machine is 1 year, the bearing is 1 year, the wear parts of air intake valve, electric components, electromagnetic valve, rate valve are 6 months
5). The air filter, oil filter, oil-water separator, lubricating oil, rubber parts and etc. are not included in warranty range.

 

7. Certification and patents of our air compressor for Pm Motor VSD Screw Air Compressor Variable Speed Screw Air Compressors:

 

FAQ:
Q1: Are you factory or trade company?  
A1: We are factory.
Q2: Warranty terms of your machine? 
A2: One year warranty for the machine and technical support according to your needs.
Q3: Will you provide some spare parts of the machines? 
A3: Yes, of course.
Q4: How long will you take to arrange production? 
A4: 380V 50HZ we can delivery the goods within 20 days. Other electricity or other color we will delivery within 30 days.
Q5: Can you accept OEM orders? 
A5: Yes, with professional design team, OEM orders are highly welcome!

Contact:

Choosing the Right Air Compressor For Your Home

You will find that air compressors are indispensable tools for a variety of situations, including garages, home workshops, and basements. These tools can power a variety of tools, and each model is sized to suit the job at hand. Because air compressors have only 1 motor, they are lightweight, compact, and easy to handle. Using 1 air compressor to power several tools will also reduce the wear and tear on individual components. This article will introduce some important characteristics to look for when choosing the right air compressor for your home.

Positive displacement

A positive displacement compressor applies pressure to a fluid, whereas a centrifugal 1 does the opposite. A positive displacement compressor creates the desired pressure by trapping air and increasing its volume. Its discharge valve releases the high-pressure gas. These compressors are used in industrial applications and nuclear power plants. The difference between a positive and negative displacement compressor is that a positive displacement compressor can compress and release air at a consistent rate.
A positive displacement air compressor uses a reciprocating piston to compress air. This reduces the volume of the air in the compression chamber, and a discharge valve opens when the pressure reaches the desired level. These compressors are used in bicycle pumps and other pneumatic tools. Positive displacement air compressors have multiple inlet ports and have several configurations. Positive displacement air compressors have a single-acting and double-acting piston, and can be oil-lubricated or oil-free.
A positive displacement air compressor is different from a dynamic compressor. It draws air into the compression chambers and then releases the pressure when the valve is opened. Positive displacement compressors are common in industrial applications and are available in single-acting, double-acting, and oil-lubricated models. Large piston compressors have ventilated intermediate pieces and crossheads on gudgeon pins. Smaller models have permanently sealed crankcases with bearings.
air-compressor

Oil-free

Oil-free air compressors have some advantages over their oil-lubricated counterparts. They do not require lubrication oil because they are coated with Teflon. The material has 1 of the lowest coefficients of friction and is layered, so it slides past other layers with little effort. Because of this, oil-free compressors tend to be cheaper and still deliver comparable performance. Oil-free compressors are a good choice for industrial applications.
The life of an oil-free air compressor is significantly longer than an oil-lubricated counterpart. These models can operate up to 2,000 hours, 4 times longer than the average oil-lubed compressor. Oil-free compressors also have a significantly lower operating noise than their oil-lubricated counterparts. And because they don’t need oil changes, they are quieter. Some even last up to 2,000 hours.
An oil-free air compressor is a good choice if your application requires high levels of purity. Several applications require ultra-pure air, and even a drop of oil can cause product spoilage or damage to production equipment. In addition to the health risks, an oil-free air compressor reduces the costs associated with oil contamination and minimizes leaks. It also eliminates the need for oil collection, disposal, and treatment.
A typical oil-free air compressor is very efficient, requiring only about 18% of the full load horsepower. However, oil-free compressors have a higher risk of premature failure and are not recommended for large-scale industrial applications. They may also use up to 18% of the compressor’s full capacity. They may sound appealing, but you must make sure you understand the benefits of an oil-free air compressor before choosing 1 for your industrial applications.

Single-stage

A single-stage air compressor is designed to provide the power for a single pneumatic tool or device. These machines are generally smaller than two-stage compressors and produce less heat and energy. These machines aren’t designed for heavy-duty industries, but they are still highly effective for a variety of applications, including auto shops, gas stations, and various manufacturing plants. They can also be used in borewells, as they are suitable for small spaces with low air flow requirements.
A single-stage air compressor has 1 cylinder and 2 valves – the inlet and the delivery valves. Both of these valves function mechanically, with the inlet valve controlling torque and the delivery 1 controlling air pressure. Generally, single-stage compressors are powered by a gas engine, but there are also electric models available. The single-stage air compressor is the most common type of air compressor. It has a single cylinder, 1 piston, and 1 air cylinder.
The single-stage air compressors are used for small projects or personal use. A two-stage air compressor is more effective for industrial projects. Its longer air end life makes it more efficient. It is also more efficient for use in the automotive industry, where the engine has many cylinders. In general, single-stage compressors require a higher power level. The single-stage model is ideal for small projects, while a two-stage 1 is suitable for larger-scale arsenals.
air-compressor

CFM

The cubic foot-per-minute (CFM) of an air compressor is the output of the machine. In order to calculate the CFM level, start by looking at the compressor’s specifications. You should know how many cubic feet the unit can hold and how many pounds per square inch it can compress. Once you have these information, you can calculate the CFM. Now you can use these numbers to select an appropriate air compressor for your needs.
The most common way to increase the CFM of an air compressor is to turn the regulator down. By turning the dial down, the air compressor will produce more than 10 CFM. You can also try connecting 2 output valves. Make sure that the settings are adjusted properly before you begin. This will ensure that your air compressor is functioning at its maximum efficiency and lifespan. To increase the CFM of your air compressor, first check that your regulator is calibrated for the desired pressure level.
To calculate the CFM of an air compressor, first determine the tank volume of the machine. Then, multiply this volume by the time it takes to fill the tank. Then, divide the result by 60 seconds to calculate the CFM. Once you know how much air your machine can hold, you can choose a suitable air compressor. If you’re working in a confined area, you should buy a tool with a large tank.

PSI

The PSI of an air compressor is the pressure that it can output. A typical air compressor has a gauge connected to the airline at the bottom, next to it, or between the two. The gauge tells the actual pressure of the air compressor, while the cut-out pressure is determined by the manufacturer. The manufacturer recommends that you set the cut-out pressure 20 to 40 PSI higher than the factory recommended pressure. If you want to set the pressure for your nail gun, you can use the cut-in and cut-out pressures on your compressor, and the tank won’t exceed this range.
The PSI of an air compressor measures the force that it can deliver, which is often in pounds per square inch. For most air tools, you need at least 40 to 90 psi. In general, reciprocating air compressors work on an on/off basis. This relationship is known as the duty cycle. All air compressors are rated for a particular duty cycle, such as 50 percent on and 20-5 percent off.
The Psig of an air compressor is not free, as many people believe. The PSI of an air compressor is not free, but it is essential to maintain it for safe operations. If you’re having trouble maintaining a consistent pressure, consider turning down the PSI of your compressor by 2 psig. This will determine the critical pressure for the machine. You’ll also increase the amount of energy in the system by 1 percent.
air-compressor

Power source

The power source for an air compressor is crucial in its operation. Without the correct voltage and amperage, air compressors will not function properly. The power source must be close to the compressor so that it can plug into an electrical outlet. If it is too far from the outlet, the compressor may not be able to build enough pressure. When this happens, the fuse inside the air compressor will turn off to protect the user. The power source should be a safe distance from the compressor.
Most manufacturers do not specify the power source for an air compressor. Depending on the horsepower, the compressor will require approximately 4 amps of power. A one-horsepower compressor would draw about 12 amps. If it were powered by a typical 120-volt household supply, its motor would exceed the 15-amp breaker capacity. A larger air compressor, however, will require a separate 15-amp power source, making it impossible to use it with this type of power source.
The power source for an air compressor is typically electrical alternating current (AC) that is equivalent to the voltage on a standard wall outlet. A three-phase air compressor, on the other hand, requires a special AC supply with 3 electrical offset pulses. Regardless of the type of air compressor, the power source must be compatible with the incoming power service. One of the most common problems when attempting to connect an air compressor to an AC power source is undersized wire. This results in low voltage and high amperes, tripping of over-load relays and blown fuses.

China Great! ! ! Variable Speed Driven Screw Air Compressor with Pm Motor  China Great! ! ! Variable Speed Driven Screw Air Compressor with Pm Motor